Introducing the Gizmag Store

Portable SunSocket Solar Generator incorporates on-board tracking

By

July 14, 2013

The SunSocket uses mono-crystalline solar panels

The SunSocket uses mono-crystalline solar panels

Image Gallery (5 images)

To get the most out of solar panels they need to be facing the right way. Systems that track the sun are often used in large solar power stations and some larger home installations, but most flat panels for portable applications just lie there. Colorado-based Aspect Solar has come up with the SunSocket Solar Generator, a lightweight, portable, self-contained solar power system consisting of a battery and solar panels that brings the advantages of automatically tracking the Sun to small applications.

On the outside, SunSocket looks a bit like something out Q’s laboratory. It’s a metal case weighing 25 lb (11.3 kg) hiding high efficiency mono-crystalline 60 Watt photovoltaic panels that charge a 20 Ah lithium iron phosphate (LiFePO4) battery that can sit idle for years. According to Aspect, it only discharges zero to two percent per month when left on its own. The entire system is self contained, needing no adapters, batteries, or cords.

So far, it seems like any other portable solar power system, but opening the lid reveals something more. Inside, there’s an expanding solar panel that slides its wings open to 44.8 in (113.7 cm). You flip up the panel, slide out the wings then, when you press the power switch, the panels automatically track the Sun. This increases performance, allowing the 250 Wh battery to fully charge in only five hours.

The SunSocket panels slide together for storage

In addition to the panels and battery, the SunSocket also has a 100-watt inverter with universal plug, a 12-volt plug, USB plugs, charge meter, and a port for charging the battery from the mains.

In good sunlight, the SunSocket can power small devices like phones and tablets for an unlimited time and for 25 hours on battery with no sun, though as you approach the maximum output the battery is fighting a losing battle, and at a load of 100 watts in good sun it can only run for 4.2 hours with panels and battery together. One drawback to note is that the system is not weatherproof and the manufacturer warns that it should be used in dry conditions only.

The SunSocket sells for US$1,499.

The video below introduces the SunSocket.

Source: Aspect Solar via The Red Ferret

About the Author
David Szondy David Szondy is a freelance writer based in Monroe, Washington. An award-winning playwright, he has contributed to Charged and iQ magazine and is the author of the website Tales of Future Past.   All articles by David Szondy
Tags
2 Comments

So expensive for what it does and it won't keep my 96% efficient 100 w heat bulb running all night.

Slowburn
16th July, 2013 @ 12:13 am PDT

Would be very interesting a stand alone sun seeking device, inverters are cheap and storage get's better by the day, the only thing that stays constant, knock on wood, is earth rotation!! Give us an affordable sun-tracking device to be used on more powerful PV panels. That could be a good contribution to the renewable's front.

nulo
16th July, 2013 @ 04:16 am PDT
Post a Comment

Login with your gizmag account:

Or Login with Facebook:


Related Articles

Just enter your friends and your email address into the form below

For multiple addresses, separate each with a comma




Privacy is safe with us because we have a strict privacy policy.

Looking for something? Search our 26,492 articles