Shopping? Check out our latest product comparisons

Soundlazer parametric speaker to enter production

By

May 4, 2012

The low-cost, pocket-friendly, open source, and completely hack-friendly Soundlazer parame...

The low-cost, pocket-friendly, open source, and completely hack-friendly Soundlazer parametric speaker has now secured sufficient crowd-funding to enter production

Image Gallery (13 images)

Sonic technology that allows audio to be specifically directed at a limited audience, as opposed to booming sound out as far and as loud as possible, has been around for a good many years but has yet to penetrate the mass consumer market. That situation could well change very shortly, however, thanks to the Soundlazer. The low-cost, pocket-friendly, open source, and completely hack-friendly parametric device developed by Richard Haberkern uses ultrasonic carrier waves to transmit sound from a connected music player on a narrow beam to a select listener.

Haberkern says that his Soundlazer project was inspired by the kinds of sonic experiments undertaken by companies and research labs for decades, in which sound is transmitted over a narrow ultrasonic beam so that someone stood close by the listener would not be able to pick up any of the source audio. It's fair to say, though, that in spite of promising successes like the Hypersonic speaker system demonstrated during a TED talk in 2004 by Woody Norris, the consumer market has not been exactly flooded by parametric speaker systems.

Diagram demonstrating the difference between audio from a loudspeaker system and a paramet...

Work on the Soundlazer system actually began a few years ago, sourcing components and tweaking the design until it was finally ready for its public spotlight earlier this year. Haberkern decided to list the project on the Kickstarter crowd-funding portal in March, to both gauge interest in the project and raise enough cash to get production moving. At the time of writing, the directional speaker system has already received a good deal more than its initial target of US$48,000 and still has a couple of weeks left to run.

Soundlazer works by sending an audio signal from a digital media player, smartphone or computer/laptop to a built-in ADAU1701 digital signal processor for enhancement prior to transmission to an oscillator where an electrical signal is produced that rapidly switches on and off at 40,000 times per second. This signal is amplified and routed to the unit's 39 piezo ultrasonic transducers responsible for Soundlazer's directional audio beam. Haberkern apparently decided on including 39 emitters as a happy trade-off between effective range and device affordability.

The wide variety of potential applications for the technology appears only to be limited by imagination. A user could, for example, share music with a friend without annoying family or colleagues in the same room. The town where I live has a quaint public address system that runs a kind of local radio station on market days, and with a directional speaker system in place, those that live in the houses above the market need not be bothered by the relentless racket from below. Vandals or burglars could be discouraged from undertaking their particular unpleasantness by pointing uncomfortable audio at them only from a remote security office, or perhaps even by using a suitably created smartphone app.

A fully functional Soundlazer unit gets ready for its first public appearance

The system outputs 120dB at 40kHz, which Haberkern says shouldn't be a problem for prolonged listening so long as the recipient is at least five feet (1.52 meters) away or bounces the signal off solid objects like walls.

Soundlazer has been developed to encourage sonic experimentation by the user. The basic kit comprises a fully functional circuit board with power supply and audio cable, and is being offered to backers who stump up at least $175. Each device will come with a complete set of design files and programming instructions, and the unit's board includes a programming port for interfacing with Analog Device's Sigma Studio DSP developing environment, which will allow users to expand the device beyond its supplied capabilities or just tailor the sound by creating custom waveforms. At this pledge level, however, this software will need to be purchased separately.

Backers who pledge $500 will find the Sigma Studio software and programming cable included with a Soundlazer that's been nicely housed in a rather swish red anodized aluminum outer case with black stand.

There's no word on post-Kickstarter pricing or availability, but backers should start to receive their fully-functional units from August.

The following video shows a functional Soundlazer in action, although I have to say that the audio reproduction in the demo is a little too "mobile phone speaker" for my liking:

Source: Soundlazer

About the Author
Paul Ridden While Paul is loath to reveal his age, he will admit to cutting his IT teeth on a TRS-80 (although he won't say which version). An obsessive fascination with computer technology blossomed from hobby into career before the desire for sunnier climes saw him wave a fond farewell to his native Blighty in favor of Bordeaux, France. He's now a dedicated newshound pursuing the latest bleeding edge tech for Gizmag.   All articles by Paul Ridden
Tags
8 Comments

It seems like a great way to listen to music or movies or games without really bothering others.

BigWarpGuy
4th May, 2012 @ 06:46 pm PDT

By nature, modulated ultrasonic speakers have a very limited audio bandwidth. The directionality is nice, but they end up sounding very thin. It is pretty much impossible to get frequency response extended to lower range at all, never mind with directionality and while maintaining small size. Pesky laws of physics!

Nibblonian
5th May, 2012 @ 12:07 pm PDT

This is a wonderful start to the "Quiet Ray," which is much needed. I want to try these out.

Eddie
6th May, 2012 @ 08:07 am PDT

This concept was introduced over a decade ago by the American Sound Institute, promising much bigger and better things for the consumer, but alas,the Military got hold of it and we're stuck with these "dinkies"

paulgo
7th May, 2012 @ 12:17 am PDT

yeah that isn;t going to work below about 1KHz - it either won;t be loud, or won;t be directional

prove me wrong

i would love to be wrong

==tinny

wle

wle
7th May, 2012 @ 09:22 am PDT

Pocket LRAD for home defense...cool.

sk8dad
7th May, 2012 @ 12:28 pm PDT

Wow. I've been wanting one of these since I saw the TED talk by Woody Norris (http://goo.gl/dH9qc). I would really like to have a 3,000 watt version that I can aim towards my noisy neighbor's house.

Ken Dawson
7th May, 2012 @ 02:28 pm PDT

I wonder if you could make headphones or earphones with this technology? That way, people can blast their MP3 players without bothering other people on public transport.

Edgar Walkowsky
8th May, 2012 @ 07:41 am PDT
Post a Comment

Login with your gizmag account:

Or Login with Facebook:


Related Articles
Looking for something? Search our 27,769 articles