Top 100: The most desirable cars of all time

Juice your iPhone on the go using this "iconic" charger

By

November 3, 2010

The Icon charging unit for iPhone

The Icon charging unit for iPhone

Image Gallery (3 images)

We've covered a number of iPhone portable chargers in the past, ranging from the well-known Mophie Juice Pack to the environmentally friendly iCharge Dx. There are countless solutions that will ensure that your green battery indicator icon stays fully green, the difference with this iPhone charger is that it's been designed to resemble that very same indicator graphic. Appropriately, it's called the Icon.

Using a mini-USB cable, you can charge the Icon power pack from your home computer to give you a battery back-up to take on the road. As it charges you'll see the green indicator lights gradually light up until it reaches four full bars. For the iPhone 3G/3GS or iPhone 4, the Icon will provide an additional 3 hours of talk time or 5.5 hours of net surfing.

Juice your iPhone on the go using this 'iconic' charger

Perhaps not the smallest available charger solution at 2.95 x 1.81 x 0.63 inches, the Icon is certainly among the most stylish. It comes in a slick microfiber sleeve that will keep it nice and clean while it kicks around in your bag. The device is composed of a lithium-ion polymer and is pretty lightweight as far as charges go, weighing in at only 43 grams.

This 'iconic' charger works not only for iPhones, but for iPods as well. Unfortunately it doesn't have enough amperage to handle an iPad.

Most readers can pick up the Icon at IPEVO's web store for about US$54. If you're in Japan, AbilityCreate Co. Ltd is selling the charger on Rakuten for 4980 yen (about $60).

IPEVO, AbilityCreate

Tags
1 Comment

OK,

But why would anyone buy something that sticks out of your iP4, when you can have a MiLi combination case & battery that adds very little to the overall dimensions of your handset.

And, you can still pick up older-model Nokia horizontal belt pouches with a magnetic snap on the covering flap, plus proper "Press Studs" on the belt loop - which accommodate a MiLi/iP4 combination comfortably.

Incidentally, Press studs - or "Poppers" as our colonial cousins call 'em - are essential on any phone case worn horizontally on the belt. If one or both press studs inadvertently come undone, the protruding portion of each stud stops the case/phone combination sliding out from under your belt unnoticed - yet allows deliberate removal (in airports etc), and refit without removing the belt.

Not only that, how many of you reading this have had one of those metal or plastic, plain or leather-clad "Belt Clips" actually allow your precious phone to pop off your belt and disappear forever? Too many to ignore this advice, methinks...

NickHD
4th November, 2010 @ 10:35 pm PDT
Post a Comment

Login with your gizmag account:

Or Login with Facebook:


Related Articles
Looking for something? Search our 29,903 articles