3D Printing

Gizmag visits the Aleph Objects 3D printer factory

Gizmag visits the Aleph Objects 3D printer factory
Lulzbot TAZ 3 printers line the cluster room four-deep and three-high
Lulzbot TAZ 3 printers line the cluster room four-deep and three-high
View 17 Images
The Easy TAZ Mini, still in development, rests in the R & D room
1/17
The Easy TAZ Mini, still in development, rests in the R & D room
Blue bins house parts printed on TAZ 3 and AO-101 printers, the parts themselves destined for future printers
2/17
Blue bins house parts printed on TAZ 3 and AO-101 printers, the parts themselves destined for future printers
TAZ ready, a TAZ 3 prints away in the R & D room
3/17
TAZ ready, a TAZ 3 prints away in the R & D room
Spools of filament line the tops of racks of LulzBot TAZ 3 printers on the right and the earlier AO-101 model on the left (Photo: Nelson Smith)
4/17
Spools of filament line the tops of racks of LulzBot TAZ 3 printers on the right and the earlier AO-101 model on the left (Photo: Nelson Smith)
An AO-101 and LulzBot TAZ 3 pose together for comparison
5/17
An AO-101 and LulzBot TAZ 3 pose together for comparison
This view of the R & D room holds a TAZ 3 and a case in development for the Easy TAZ Mini
6/17
This view of the R & D room holds a TAZ 3 and a case in development for the Easy TAZ Mini
Blue bins house parts printed on TAZ 3 and AO-101 printers, the parts themselves destined for future printers
7/17
Blue bins house parts printed on TAZ 3 and AO-101 printers, the parts themselves destined for future printers
The current generation TAZ 3 3D printer at work in the R & D office
8/17
The current generation TAZ 3 3D printer at work in the R & D office
Parts housed in yellow bins wait to be added to future printers, some shipping as early as tomorrow
9/17
Parts housed in yellow bins wait to be added to future printers, some shipping as early as tomorrow
The printer factory features a table of different printed examples, toys, gears, and tools illustrating TAZ 3 filament types, print quality, and practicality
10/17
The printer factory features a table of different printed examples, toys, gears, and tools illustrating TAZ 3 filament types, print quality, and practicality
The printer factory features a table of different printed examples, toys, gears, and tools illustrating LulzBot filament types, print quality, and practicality
11/17
The printer factory features a table of different printed examples, toys, gears, and tools illustrating LulzBot filament types, print quality, and practicality
Shelves of parts wait after being printed to be installed into their own printer
12/17
Shelves of parts wait after being printed to be installed into their own printer
The LulzBot octopus logo frames the entrance to the 3D printer cluster at Aleph Objects, Inc. in Loveland, Colorado
13/17
The LulzBot octopus logo frames the entrance to the 3D printer cluster at Aleph Objects, Inc. in Loveland, Colorado
A Lulzbot TAZ 3 zips away at Y-corner parts which will later serve as the feet holding up the Y-axis of a future printer
14/17
A Lulzbot TAZ 3 zips away at Y-corner parts which will later serve as the feet holding up the Y-axis of a future printer
Lulzbot TAZ 3 printers line the cluster room four-deep and three-high
15/17
Lulzbot TAZ 3 printers line the cluster room four-deep and three-high
The LulzBot logo, captured in ABS plastic and framed by the company's octopus that arrives with every printer purchase
16/17
The LulzBot logo, captured in ABS plastic and framed by the company's octopus that arrives with every printer purchase
Lulzbot TAZ 3 printers line the cluster room four-deep and three-high
17/17
Lulzbot TAZ 3 printers line the cluster room four-deep and three-high
View gallery - 17 images

Aleph Objects, maker of the LulzBot line of 3D printers, recently made the switch to a new facility in Colorado, big enough to meet its expanding production needs and designed to add more injection-molded and laser-cut parts to the printers. I toured the massive cluster of 135 operating 3D printers, asked about AO’s upcoming plans for not only new printers but other hardware, learned how customers and community drive innovation, and met a fascinating LulzBot client who’s using the Open Source/Libre technology to jumpstart his vision of the future. If you’ve ever wanted to see 135 3D printers in action simultaneously, look no farther.

While the hallmark of a RepRap-based printer is its ability to print copies of itself, changing some 3D-printed parts to injection-molding or laser cutting allows the company to finish printers more quickly. But 3D printing is still used at LulzBot to fuel quick iterative prototypes, print many parts, and as a foundation for creating injection molds.

A Lulzbot TAZ 3 zips away at Y-corner parts which will later serve as the feet holding up the Y-axis of a future printer
A Lulzbot TAZ 3 zips away at Y-corner parts which will later serve as the feet holding up the Y-axis of a future printer

The 3D Printer Cluster

The cluster of 3D printers is housed in a deceptively small room, with 135 printers in four rows and stacked three high. Most of the printers are the most recent model, the TAZ 3, but a row of AO-101s lines the back and still happily churn away at their assigned parts.The room is also quieter than one might expect, and you can even check the printing schedule and parts list on the company’s website.

Blue bins house parts printed on TAZ 3 and AO-101 printers, the parts themselves destined for future printers
Blue bins house parts printed on TAZ 3 and AO-101 printers, the parts themselves destined for future printers

Cluster technicians circulate the printer room, relocating printed parts to bins which flank the printers, parent and child being kept together for just a little while longer. Some of these parts may even be used in printers being shipped tomorrow. The cluster can output nearly 40 kg (88 lb) of parts a day, and could double that without adding extra printers.

TAZ Development and New Products

It’s important to note that while TAZ development has had discrete milestones, being initially introduced in May 2013 with the TAZ 2.0 released in October 2013, and the TAZ 3.0 just last month, in reality development is an ongoing evolution – something that the LulzBot online community knows well. Some of the community’s improvements even find their way into future iterations of the TAZ, as did a user's design for the filament spool holder.

This view of the R & D room holds a TAZ 3 and a case in development for the Easy TAZ Mini
This view of the R & D room holds a TAZ 3 and a case in development for the Easy TAZ Mini

I was able to see an operational 4.0 version of the TAZ, nicknamed Guava, but as I was told by Jeff Moe, CEO of Aleph Objects, “You don’t have to be at our headquarters to see our new design.” New designs are not locked down under patents, but available online in AO's code repositories.

The TAZ 4.0 will offer, among other things, easier set-up, a better power supply, and streamlined two-filament printing optionality. The Easy TAZ Mini is another printer to look for later this year, with the company soon presenting its goals for feedback from the community for the smaller TAZ sibling which is ready to go out of the box.

New dual extruder and Flexystruder nozzles are also due to be released soon, for use with 11 filaments, including the rubbery NinjaFlex, food-safe T-Glase, and sandable LayWoo-d3 (LayWood).

The printer factory features a table of different printed examples, toys, gears, and tools illustrating LulzBot filament types, print quality, and practicality
The printer factory features a table of different printed examples, toys, gears, and tools illustrating LulzBot filament types, print quality, and practicality

A 3D scanner is also being discussed, with Harris Kenny noting that Aleph Objects is in the business of open hardware, not just open printers. With nine acres of land to still expand on and 40 new employees being planned on for 2014, there’s room for even more product lines.

Previously Gizmag reviewed an earlier TAZ model and compared the TAZ 3 to some of its competitors.

A LulzBot Case Study

While visiting, I met LulzBot user Marcin Jakubowski, the founder and director of Open Source Ecology. OSE creates the Global Village Construction set, a modular and open-source system of the most critical tools to build a civilization, like a tractor or power generator. 3D printing is an essential component of the continual iteration and development required at OSE.

Jakubowski is not only a supporter of Aleph Objects because its product enables him to simulate building his designs in a fraction of the time as using metal would, but because of a shared perception of how open development spurs technological advancements.

The next direction Jakubowski would like to take is offering training workshops to teach others how to make one of OSE's tools. Because the Lulzbot designs are completely open-source, Jakubowski can choose to offer a modified LulzBot design for workshop attendees to create from scratch and learn to use.

However, while open source principles may dominate at one level and allow end users to access the newest advances on the TAZ without paying upgrade fees, the company’s products are accessible to those who aren’t power users. Kenny refers to AO's reputation for excellent customer service and highlights that other printer companies use the LulzBot Budaschnozzle with their products.

For the upcoming Hardware Freedom Day, AO is giving away eight TAZ 3 printers to hackerspaces as a demonstration of its support of those making “contributions to the free software and open hardware community."

In the video below, you can see the previous LulzBot printer cluster, featuring several dozen 3D printers working simultaneously.

Source: Aleph Objects, Inc.

LulzBot / Aleph Obects, Inc. Headquarters

View gallery - 17 images
No comments
0 comments
There are no comments. Be the first!