Physics

New process prints electroluminescent layers directly onto three-dimensional objects

New process prints electroluminescent layers directly onto three-dimensional objects
Researchers claim to be able to print electroluminescent panels directly onto the surface of 3D objects
Researchers claim to be able to print electroluminescent panels directly onto the surface of 3D objects
View 1 Image
Researchers claim to be able to print electroluminescent panels directly onto the surface of 3D objects
1/1
Researchers claim to be able to print electroluminescent panels directly onto the surface of 3D objects

Electroluminescent (EL) panels are found in many electronics applications, particularly as backlighting for LCD displays, keypads, watches, and other areas requiring uniform, low-power illumination. While relatively flexible, when EL panels made from plastic are bent too sharply, fractures and a severely diminished output usually result. As a result, EL panels have generally been restricted to flat or slightly curved surfaces. However, researchers from Karlsruhe Institute of Technology (KIT) and Franz Binder GmbH & Co have now developed a new manufacturing process to print EL panels directly onto the surface of almost any convex and concave shape. Even, apparently, onto spheres.

Inessence, the new technique involves printing electroluminescent layers directlyonto an object without any intermediate carrier layer (the plastic material mentioned earlier). In this way, convex and concavesurfaces of various materials can be made to glow when an electric current isapplied.

"By meansof the innovative production process we developed together with our industrypartner, any type of three-dimensional object can be provided with electroluminescentcoatings at low costs," said Doctor Ing. Rainer Kling, associate professor at the Light TechnologyInstitute of KIT.

Electroluminescentpanels are a very popular way to backlight a screen, particularly as theyprovide an even glow across their entire face, use very little power, andgenerate almost no heat. And they have been around for longer than you mightthink. Believe it or not, General Electric has had patents on them since 1938,and EL panels have been in use in automobiles since at least 1960 when Chryslerused them in their prestige models.

Essentiallythe equivalent of a capacitor when used in an AC (Alternating Current) circuit,EL panels encase theirlight-emitting material between two electrodes. In standardpanels, one electrode is generally clear glass or plastic coated with a transparent conductive coating, while theopaque rear electrode is generally made from a reflective metal foil.

In theKIT/Binder EL panel, however, the production process sees different componentsof the coating (specifically the electroluminescent and electrically conductiveingredients) applied using a new and unique pad printing process. The printingmachine is furnished with an elastic rubber pad that deforms when applying thecoatings, thereby being able to conform to uneven or complex 3D shapes.

"In thisway, it is possible to provide surfaces and even spheres with homogeneouscoatings at low costs," said Elodie Chardin, an engineer working on theproject. "Homogeneity of the coating of about one tenth of a millimeter inthickness was one of the challenges of this project."

Though Saarland University announced a prototype EL printing method earlier this year using ink-jet printers, the KIT/Binder version seems to be the first to produce such coatings on a commercial scale. The process also only requiresvery few production steps, which saves money and resources, and a large range colors may beapplied to the same surface, thereby providing more versatility to the 3D EL panels.

The short video below shows the process in action on ordinary paper.

Source: Karlsruhe Institute of Technology

Leuchtendes Papier💡 | 3D-Direktdruck der AC-Dickschicht Elektrolumineszenz (binder connector)

1 comment
1 comment
Mark Salamon
Ever since I was a boy in the 1960s with a green electroluminescent nightlight in my bedroom, I have been fascinated with this technology. Whenever I saw electroluminescent lighting used in consumer applications over the years, I often wondered why these panels were rarely seen in any colors besides white or green. I always figured that most any color in the spectrum could be created, depending on the phosphors used. Watching this video from the Karlsruhe Institute of Technology has finally confirmed my hunch. It also occurred to me that large video display screens could be printed, using small, differently-colored electroluminescent panels arranged in a grid, like pixels. The electrodes for controlling the individual brightness levels of these "panel-pixels" could be applied to the screen in an earlier step of this printing process. I'd always imagined that a video monitor created in this way would need to be printed on a rigid transparent material like glass or plastic, but with the technology developed by KIT, it now appears that an electroluminescent video display could be printed on a thin, flat, opaque and flexible material similar to the kind that is already being used for projector screens in movie theaters and homes. Because electroluminescent panels seem to convert electricity into light very efficiently with little heat production, it might be able to produce large-screen displays that are inexpensive to operate and last for decades. Such screens may have lower maximum light output than other emissive display technologies like plasma or OLED, but in a completely darkened room they could be sufficiently bright.
I am not a scientist or an engineer, so I'm not sure if the process I have described is even feasible, but it has always been one of my "pipe dreams"...