Outdoors

Jompy: a hot water tap for your hydration bladder

Jompy: a hot water tap for your hydration bladder
The large Jompy offers the fastest boiling time - one liter in about 45 seconds
The large Jompy offers the fastest boiling time - one liter in about 45 seconds
View 3 Images
The smallest Jompy weighs just over two ounces
1/3
The smallest Jompy weighs just over two ounces
The medium Jompy is good for family and small group camping
2/3
The medium Jompy is good for family and small group camping
The large Jompy offers the fastest boiling time - one liter in about 45 seconds
3/3
The large Jompy offers the fastest boiling time - one liter in about 45 seconds
View gallery - 3 images

A funny name but an innovative design, Jompy allows campers, backpackers, hikers and other outdoor enthusiasts to get hot water from their hydration packs. The simple device works in conjunction with a hydration bladder and camping stove to deliver boiling water for use in food, beverages and cleaning.

Made by UK company Celsius Solar, Jompy is a coiled aluminum disc that connects to the hose from a hydration bladder or water bottle. It rests on top of the stove, and its flat design allows you to cook on top of it. The water is fed into the coil, heats to boiling and is shot out a faucet. Because Jompy features a coil, it has a lot of surface area on the heat source, allowing water to heat quickly. The largest model boils a liter in as little as 45 seconds. According to the website, Jompy uses 60 percent less gas when boiling water than a pan. It works with all types of heat sources - wood, liquid fuel, charcoal, etc.

Ordinarily, you're limited to cooking one thing at a time with a single-burner camping stove. You can boil a pot of water for your dehydrated meal or cook some sausages in a pan, but you can't do both. With the Jompy system, you can essentially do two things at once with a small single burner. The system's flat design allows you to place a pot on top of it and cook something else while also heating water.

Boil water for your tea or coffee and cook breakfast on the stove. Boil two times the amount of water, in order to purify it or use it to prepare backpacking meals. You get the function of a dual burner with a smaller single burner.

In addition to the basics, it looks like you could get creative with this thing and use it for other purposes like washing dishes or showering. In one of the videos on Jompy's website, they show the unit being hooked up to a portable shower. Of course, you'd have to make sure that the water was cool enough to put your skin under, but it appears possible.

The smallest Jompy weighs just over two ounces
The smallest Jompy weighs just over two ounces

Jompy offers three different systems. The large version is essentially a base camp design for groups. That model weighs 1.33 lbs (605 g), has a capacity of 1.2 liters and spits out a liter in under a minute. The medium-sized version is good for families and smaller groups, offering a half-liter capacity, 60- to 80-second boil time for 1 liter, and a weight of one pound (450 g). The smallest unit weighs only 2.1 oz (60 g), making it practical for backpackers, hikers, kayakers and other adventurers looking to limit weight. It boils 330 ml of water in about 90 seconds. The units retail between £49.90 - £59.90 (US$78 to $94)

Not only is Jompy a useful innovation for campers, but the company also believes it has value to the developing world, where it could help families and villages clean water and prepare food more efficiently. For every unit sold online, the company says it will send a unit to an African family.

Source: Jompy via Outdoors Magic

View gallery - 3 images
7 comments
7 comments
Slowburn
Looks nifty but I don't think aluminum is the right material.
toolman65
i agree with slowburn that another material be used.
given a hot enough fire , aluminum will burn quite readily. i propose the coil be made from copper and the plate from stainless steel.
secondly,the water should be run through a filter before heating, lest the coil become clogged with sediment.
finally , simply boiling the water does not ensure that the water is purified, especially at higher altitudes, where the boiling point drops.
a good idea that needs some tweeking.
Bill Bennett
gotta agree toolman65, though, the altitude thing for me is not an isse
Billy Robb
As long as there is water in it, it should never burn. Have you ever boiled an egg in a paper cup on a fire?
Gasman
Hi all, this the inventor of the jompy, first of all thank you for all your comments, also I'd like to clear up a few things, we use a hardened aluminium alloy not straight aluminium, also the word purification is a word the press use and never used by us, we clean water by boiling, we can also prove that this is enough to protect from most bacteria. Also we do recommend a rolling boil however the WHO do not insist and already clarified that they recommend up the boil only. "Bruce Gordon" who attended the international plumbing conference 2011 where I was a guest speaker in Edinburgh clarified this. Copper was too expensive and was regularly stolen so aluminium alloy is favourable. Also altitude posed no problem to us even in Nepal. We tested it with some local sherpa's. Left some units with budhist monks who still use the jompy's. Any more questions please post I'll be watching, happy camping Kindest regards. Gasman (David Osborne)
Letmehike
This is a great Idea! Usually, when backpacking I bring a liter and a half of gas with me and taking the Jompy along would more than compensate for the weight. How would it work with a pressurized hydration system like the GEIGERRIG hydration pack?
James Bailey
I agree with Letmehike, I have both a Jompy mini (thanks to this article) and a Geigerrig pressurized hydration pack, but the bite valve doesn't come off and the tube size is wrong, isn't there some kind of 2xtube+flow control that can be made for the Jompy/Geigerrig, because they would so naturally work together!