The LifeStraw makes dirty water clean
from Good Thinking (406 articles)
The LifeStraw makes dirty water clean
Image Gallery ( 5 images )Q6. How does LifeStraw function? LifeStraw contains PuroTech Disinfecting Resin (PDR) - a patented, extraordinarily effective material that kills bacteria on contact. Textile pre-filters are used in the LifeStraw to remove particles up to 15 microns. Active carbon withholds particles such as parasites.
Q7. What do the tests and research studies indicate? The studies indicate the following:
The level of bacteria in the water will be reduced to levels that will provide water safe for human consumption. ‘Safe’ implies water from which any health risk is minimal. The particulate removal suggests that the number of any parasitic ova in raw water will also be reduced significantly. The released amount of iodine in water treated from LifeStraw is not normally damaging to human health. However, people having thyroid problems and allergic reaction to iodine must seek medical advice before using this tool.
Q8. What is the life expectancy of the LifeStraw? One year from the start of usage (calculation based on consumption of 2 litre water per day) or 700 liters. Use beyond expiry will not deteriorate existing water quality.
Q9. What is the required daily water consumption? The WHO default levels for the quantities of drinking water (reference to WHO drinking water quality guidelines Third edition 2004, Annex III), are: For a 10 kg child, 1 litre water per day - thus 700 days tool For a 60 kg adult, 2 litre water per day - thus a 350 days tool
Q10. Who can use the LifeStraw? Adults and children of any age can use the LifeStraw, provided they have capacity to suck water
Q11. How should LifeStraw be used the first time? First time users are advised to spit out the first couple of mouthfuls (40 ml) as a small amount of harmless black carbon water will be expelled on initial use. First time users may find it difficult to start sucking. This is because a natural brake on the flow of water has been put into the LifeStraw, as a controlled flow between 100 ml to 150 ml per minute is needed to get the maximum benefit of the bacteria killing effect.
Q12. How can LifeStraw be effectively utilised? At regular intervals, it is recommended to blow out the last mouthful of water as well as some air through the LifeStraw. This will clean the pre-filters of whatever sand, silt and debris that might have got stuck in the textile filters.
Gallery Images
Related Articles
Lifesaver: all-in-one water filtration bottle removes pathogens without the use of chemicals
Pedal power delivers clean water to the developing world
Lifestraw, iPod and Softwall take major design awards
Thirst Aid – on-the-fly water purification
Catit filtered water system for cats - and dogs!
Electrolux Sunny solar water front loader




