Electronics

Flipit lets you charge devices from outlets that are in use

Flipit lets you charge devices from outlets that are in use
The Flipit is a charging device that draws power from electrical outlets that are already in use
The Flipit is a charging device that draws power from electrical outlets that are already in use
View 4 Images
The Flipit is a charging device that draws power from electrical outlets that are already in use
1/4
The Flipit is a charging device that draws power from electrical outlets that are already in use
Instructions for using the Flipit
2/4
Instructions for using the Flipit
The Flipit is a charging device that draws power from electrical outlets that are already in use
3/4
The Flipit is a charging device that draws power from electrical outlets that are already in use
The Flipit is a charging device that draws power from electrical outlets that are already in use
4/4
The Flipit is a charging device that draws power from electrical outlets that are already in use
View gallery - 4 images

Perhaps you've encountered a travel scenario like this before ... you arrive at your hotel room and go to plug in your mobile phone, only to discover that the bedside lamp and clock radio are already occupying both plug-ins of the most conveniently-located AC wall outlet. While there might be room on another outlet, it could involve your having to squeeze in behind the TV, or leaving your phone someplace where you might forget it. If you had a Flipit USB charger, however, you could draw power from that first outlet, while still leaving the light and the radio plugged in.

The Flipit works via a flat conductive "power tab," which folds underneath the main unit for storage. When you want to use it to charge your mobile device, you fold out the tab, unplug one of the existing appliances from its outlet, run its prongs through the holes on the tab, then plug it back into the outlet. While the appliance will still receive a sufficient operating current, the Flipit will draw from it, providing 1 Amp of electricity through its USB-out port. A standard USB cable will convey that current to your device.

Most mobile devices are compatible with the charger, although the iPad is one notable exception. The Flipit is available on Amazon for US$15.99. There are presently no models for non-North American style plug-ins.

Source: 7 Gadgets

Perhaps you've encountered a travel scenario like this before ... you arrive at your hotel room and go to plug in your mobile phone, only to discover that the bedside lamp and clock radio are already occupying both plug-ins of the most conveniently-located AC wall outlet. While there might be room on another outlet, it could involve your having to squeeze in behind the TV, or leaving your phone someplace where you might forget it. If you had a Flipit USB charger, however, you could draw power from that first outlet, while still leaving the light and the radio plugged in.

The Flipit works via a flat conductive "power tab," which folds underneath the main unit for storage. When you want to use it to charge your mobile device, you fold out the tab, unplug one of the existing appliances from its outlet, run its prongs through the holes on the tab, then plug it back into the outlet. While the appliance will still receive a sufficient operating current, the Flipit will draw from it, providing 1 Amp of electricity through its USB-out port. A standard USB cable will convey that current to your device.

Most mobile devices are compatible with the charger, although the iPad is one notable exception. The Flipit is available on Amazon for US$15.99. There are presently no models for non-North American style plug-ins.

Source: 7 Gadgets

View gallery - 4 images
14 comments
14 comments
Slowburn
Or you could spend less than half as much on an outlet splitter.
Gadgeteer
Almost two years after its introduction, people are still spreading the myth that the iPad somehow won\'t work on regular USB chargers? A 1A (5W) charger like this can\'t charge an iPad while you\'re using it because it uses about that much power in operation. But it absolutely can charge an iPad if you turn it off. The only time you need the iPad\'s own 10W charger is if you want to use it and charge it at the same time.
ivan4
Not the safest of bits of equipment - it\'s the equivalent of poking a couple of bare wires in with the plug.
The safer way is, as Slowburn says, to use a double adapter.
agulesin
One that makes me say \"why didn\'t I think of that?\" Great idea and easy to adapt for other countries. I\'m sure they could print a sheet with circuits suitable for most countries on the same plastic...
Of course the load can only be minimal, you\'re not going to run a hairdrier off this...
agulesin
@Slowburn - but you still have to carry a charger and forgetting a splitter is easier than forgetting something with a cable on it...
@ivan4 I\'m sure the design is safe - there\'s no exposed conductors...
Slowburn
It does not look unsafe to me. Just not the most cost effective way of getting the capability.
William H Lanteigne
I\'d have to go with the splitter. I already have a couple spares, and if I need one on the road I can always pick one up at Walgreens or Walmart for a couple bucks.
Calson
Or you could spend $15 and get 5 of the Liberator cords from Ziotek and others.
http://www.amazon.com/Ziotek-ZT1212518-Liberator-Through-5-Pack/dp/B003YFIRR6/ref=pd_cp_hi_pw_1
For travel I take the cheapest and therefore the lightest power strip I can find and then put one adapter plug on it for an outlet. Advantage of the $4 plastic power strip is that I can then plug in 4-5 devices without needing a special adapter and the power strip is on a flat surface. Often the available outlets are in a location where it is not practical to plug in a device for recharging as when it is behind the headboard of a bed or in the bathroom over the sink or in the side of a ceiling lamp.
Carson Kerr
There\'s these great things called power strips, I don\'t know if you\'ve heard of them.
This seems like a terminal case of over-thinking something and making it more complicated.
Ed
@Gadgeteer The USB 2.0 spec is limited to 500ma per USB buss. Most computers have two USB buss\'s. If you have the iPad plugged into one USB port and you are sharing that buss with a second usb device, like a thumb drive, there will not be enough power to charge the iPad. And if you attempt to do so, you run the risk of frying your motherboard. Just sayin
Load More