Outdoors

Alligator Lopper chows down on trees

Alligator Lopper chows down on trees
The Black & Decker Alligator Lopper LP1000 makes light work of branches and logs up to 4 inches in diameter
The Black & Decker Alligator Lopper LP1000 makes light work of branches and logs up to 4 inches in diameter
View 7 Images
The Black & Decker Alligator Lopper LP1000
1/7
The Black & Decker Alligator Lopper LP1000
The Black & Decker Alligator Lopper LP1000 makes light work of branches and logs up to 4 inches in diameter
2/7
The Black & Decker Alligator Lopper LP1000 makes light work of branches and logs up to 4 inches in diameter
The Black & Decker Alligator Lopper LP1000
3/7
The Black & Decker Alligator Lopper LP1000
The Black & Decker Alligator Lopper LP1000
4/7
The Black & Decker Alligator Lopper LP1000
The Black & Decker Alligator Lopper LP1000
5/7
The Black & Decker Alligator Lopper LP1000
The Black & Decker Alligator Lopper LP1000
6/7
The Black & Decker Alligator Lopper LP1000
The Black & Decker Alligator Lopper LP1000 makes light work of branches and logs up to 4 inches in diameter
7/7
The Black & Decker Alligator Lopper LP1000 makes light work of branches and logs up to 4 inches in diameter
View gallery - 7 images

Black & Decker has a tool that fits comfortably between a chainsaw and a branch lopper. It’s the Alligator Lopper LP1000 and can cut through branches and logs up to four inches thick. It uses its patented scissor action to grab the offending piece of wood, clamps it tight and then powers through it with a 4.5Amp motor driven chainsaw.

This handy device has a number of safety features built in, like a two-handed trigger to prevent accidental start up of the chain and a safety guard over the blades and clamps.

What’s more, it can be used to cut up fallen branches or logs lying on the ground without risking blunting the chain blades from touching the ground. It can also be used to cut logs or branches side-to-side rather than only from top to bottom like a traditional chainsaw and it is effortless compared to standard non-powered loppers.

The Alligator Lopper LP1000 weighs 6.5lbs and has a 6-inch bar, making it suitable for male and female use and great for anywhere outdoors where power is within reach (like a generator).

The device is available through Black & Decker, online at Amazon and other Internet-based stores from around US$80.

Via OhGizmo!

Black & Decker Alligator Lopper Tool

View gallery - 7 images
5 comments
5 comments
royale455@yahoo.com
Four in diameter branches can get pretty long and therefore heavy. I would imagine that the tool would be ripped out of the user\'s hands... if they are lucky. I see lots of sprained and broken wrists and fingers in the future.
OpinionsR_Us
This is a great tool. Lightweight and easy to operate from a ladder. It definitely goes through at least 4 inches of limb.
Stuart Anderson
Welcome to 5 or 6 years ago. I bought one of these back when they first were introduced. It does a pretty good job.
Terotech
As one side of the cut is secured to the tree, and the cut is from both sides, how is the tool going to be dragged from the operator\'s grip? Looks good to me!
agulesin
Looks like a nice bit of kit.
I was wondering how \"a 6-inch bar\" makes \"it suitable for male and female use\"... Anyway, let\'s not think about that too much! 8-)