Drones

New 3D sensor should help UAVs avoid fender-benders

New 3D sensor should help UAVs avoid fender-benders
A TriDiCam camera, outfitted with the new 3D CMOS system
A TriDiCam camera, outfitted with the new 3D CMOS system
View 3 Images
A TriDiCam camera, outfitted with the new 3D CMOS system
1/3
A TriDiCam camera, outfitted with the new 3D CMOS system
2/3
3/3
View gallery - 3 images

Hovering unmanned aerial vehicles (UAVs) – most of which take the form of quadrocopters – are currently being developed for a wide range of applications. Some of these include the delivery of supplies to remote locations, urban reconnaissance, and military operations. Whether they’re flying solo or in organized swarms, however, they constantly need to be aware of potential collision hazards, both mobile and stationary. While various technologies are already being utilized for this purpose, Germany’s Fraunhofer Institute for Microelectronic Circuits and Systems has developed a new 3D CMOS sensor, that promises particularly good performance.

The sensor is based around the time-of-flight process, in which the relative distances of objects are determined by shooting short bursts of light at them, and measuring how long it takes that light to reflect back to an onboard receptor. In order for the reflected light pulses not to be masked by bright ambient light, the receptor’s shutter only stays open for a few nanoseconds. The sensor processes the data at a rate of 12 images per second.

Every pixel of these images is assigned a gray value, along with a distance value. That level of differentiation allows the system to identify objects as small as 20 x 15 centimeters (8 x 6 inches), from distances of up to 7.5 meters (24.6 feet).

Based on this constant stream of data, the UAV can determine its location in space, relative to the objects surrounding it.

While the process may sound somewhat similar to radar or sonar, its higher resolution apparently makes it much better suited to the close-proximity flying that quadrocopters are frequently required to do.

The 3D sensors have been built into cameras made by a Fraunhofer spin-off company, TriDiCam.

Source: Fraunhofer

View gallery - 3 images
3 comments
3 comments
Grunchy
Once there's a good UAV quadcopter system in place, how long before people start building ones big enough to commute with, and tap into that system? Imagine, pilotless copters before driverless cars. I would love to fly into work above the traffic jams that the roads have become.
Stevo
I don't know any UAV Quadcopter would carry that monstrous thing.
Oztechi
Would this system work at night or in low light? If not then back to the drawing board.